DLD1368-H120-DA / DX DLD1368 Series
Non-isolated 1368 W, 2 Channels, DALI-2 or DMX-RDM, IP66, 220-400 VAC, LED Driver
-
Nominal input voltages: 220-240/277/347/400 VAC
-
2 independent and individually controllable, non isolated Class I, 684 W, output channels
-
Standby power consumption < 0.5 W at 230 VAC (as per EU 2019/2020)
-
Typical operation efficiency: 97%
-
Output current range, DALI / DMX programmable: 700-1400 mA
-
Operating output voltage range: 300 – 565 VDC
-
Full set of electrical protections
-
IEEE 1789 Flicker Recommended Practice Compliant
-
Remote installation capability up to 200 m
-
No afterglow when Dim-to-Off asserted
-
Surge level 10 kV for both common mode and differential mode
-
DALI-2 configurable as single-channel (1 x DT6) or multi-channel (up to 2 x DT6) operating mode
-
DALI-2 certified (data specification according to DiiA Part 251, 252 and 253), controls up to 33FPS
-
DMX-RDM up to 33 FPS
-
Smooth dimming down to 12.5 mA (Dim-To-Off)
-
Adaptive thermal protection for LED module
-
Remote firmware update through DALI interface
-
IP66, IK08, C5-M, enclosure rating
-
Compatible with Emergency Lighting (EL) requirements
-
Outdoor and indoor sport venues lighting
-
Large area high mast lighting
-
Architectural and urban lighting
-
Horticultural and farming lighting
The DLD1368 series of LED drivers is a Class I non-insulated, 1368 W, 2 (two) output constant current channels, DALI-2 or DMX-RDM programmable. Its IP66, IK08 enclosure, including a built-in junction box, and high AC port surge immunity, make it suitable for outdoor and harsh environment applications. Its output currents characteristic makes it suitable for HD Slow-Mo TV broadcasting applications.
The DLD1368 series has been specifically conceived to supply high quality and programmable constant current to high end professional
LED modules for sport venues lighting, large area lighting, horticulture, tunnel and high-mast lighting in general. Its design also ensures higher energy efficiency and compliance with the Commission Regulation (EU) 2019/2020, which lays down Eco-design requirements for light sources and separate control gears (SLR, Single Light Regulation).
It comes ENEC certified, and UL listed, according to latest IEC/EN 61347-2-13, IEC/EN 61347-1, IEC/EN 62384 and ANSI / UL8750, CSA C22.2 No.250 safety standards.
It carries CE and UKCA marks and its design is fully complying with CCC and RCM safety requirements.
The DLD1368 Series is compatible to emergency lighting – EL – operating conditions.
Macro industries applications
List of models
- Input Voltage (VAC)
- 198 - 440
- Efficiency Rating (%)
- 96 - 97
- Operating temperature range
- -40 - 80 °C (Tc), -40 - 50 °C (Tamb)
- IP Rating
- IP66
- Cooling
- Natural Convection
- Safety
- ENEC: IEC / EN 61347-2-13, 61347-1; UL: ANSI / UL 8750; CSA: C22.2 No. 250
- Input Voltage (VAC)
- 198 - 440
- Efficiency Rating (%)
- 96 - 97
- Operating temperature range
- -40 - 80 °C (Tc), -40 - 50 °C (Tamb)
- IP Rating
- IP66
- Cooling
- Natural Convection
- Safety
- ENEC: IEC / EN 61347-2-13, 61347-1; UL: ANSI / UL 8750; CSA: C22.2 No. 250
